Axis with keyway, Absolute, 50 W SV-M005AK

SV-M005AK - Axis with keyway, Absolute, 50 W

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model				SV-M005AK
General specifications	Type			Standard motor, Absolute Type (ABS)
	Applicable servo amplifiers			SV-005**
	Rated output			50 W
	Rated torque			0.159 N m
	Instantaneous maximum torque			0.557 N m
	Rated current			0.61 Arms
	Instantaneous maximum current			2.1 Arms
	Rated rotation speed			3000 min^-1
	Highest rotation speed			6000 min^-1
	Torque constant			0.285 N m/Arms
	Rotor moment of inertia			0.0414 ×10^-4kg・m²
	Rated power rate			6.11 kW/s
	Rated angle acceleration			38400 rad/s²
	Excitation method			Permanent magnet
	Allowable load moment of inertia ratio			20 times
	Resolution			20bit
	Operating environment	Operating ambient temperature		0 to +40°C (No freezing)
		Ambient storage temperature		-20 to +60°C (No freezing)
		Ambient operating/storage humidity		20 to 80%RH (no condensation)
		Vibration resistance		49 m/s² with the servo motor flange used as reference surface (3 directions: up/down, right/left, and forward/backward)
		Shock resistance		490 m/s² for two times with the servo motor flange used as reference surface
		Enclosure rating		Totally enclosed, self-cooling, IP65 (excluding connectors and shaft opening)
	Operating environment			Indoors (No corrosive gas, flammable gas, oil mist, or dust)
	Operating environment	Altitude		1,000 m max. above sea level
	Approved standards	UL/CSA standards		UL1004 C22.2 No.100
		CE marking	Low-voltage directive	EN60034-1, EN60034-5
			EMI	EN55011 Class A, EN61800-3
			EMS	EN61800-3
		North American EMI standards		FCC Part15 B, ICES-003. Class A
	Insulation class			Class B
	Insulation withstand voltage			1500 VAC for 1 minute
	Insulation resistance			10 MΩ min. with 500 VDC megohmmeter
	Weight			Approx 0.3kg
	Note			Rates torque of 50 W to 750 W is the continuous permissible torque values in the following conditions: -Ambient temperature: 40°C -Attached aluminium heatsink: 50 W to 100 W: 200 × 200 × 6 [mm] 200 W to 750 W: 250 × 250 × 6 [mm] Rates torque of 1 kW to 5 kW is the continuous permissible torque values in the following conditions: -Ambient temperature: 40°C -Attached iron heatsink: 1 kW to 2 kW: 400 × 400 × 20 [mm] 3 kW, 5 kW: 550 × 550 × 30 [mm]

Data Sheet (PDF) Other Models