Controller, PNP Type LJ-V7001P

Model

LJ-V7001P

Number of connectable sensors

Max. 2 units

Display

Minimum
displayable unit

0.1 µm, 0.00001 mm², 0.01°

Maximum display range

±9999,99mm, ±9999,99mm²

Input terminal block

Laser remote interlock input

Non-voltage input^*1

Input
terminal block

Encoder input

NPN open-collector output, voltage output (5 V/12 V/24 V), and line-driver output all supported

Input terminal block

Trigger input

Voltage input^*2

Timing 1,2 input

Auto-zero 1,2 input

Input
terminal block

Reset 1, 2 input

Input terminal
block

Start measurement/stop input

Start storage/stop input

Clear memory input

Laser OFF input

Programme switch input

Voltage input x 4 inputs^*2

Output terminal block

Analogue voltage output

±10 V x 2 outputs, Output impedance: 100 Ω

Output
terminal block

OUT comparator output

PNP open collector output x 12 outputs^*3
(Can freely assign 16 OUTs x 3 stage judgement results)

Strobe output

PNP open collector output^*3

Disable trigger output

Memory FULL output

Ready output

Output terminal block

Error output

PNP open collector output (N.C.)^*3

PC interface

Ethernet

1000BASE-T/100BASE-TX^*4

USB

USB 2.0 high speed compliant (USB 1.1 Full-SPEED compatible)^*4

RS232C

Measurement data output and control I/O (Can select a baud rate of up to 115,200 bits/s)

Rating

Power voltage

24 VDC ±10 %, including Ripple (P-P)

Current consumption

1.3 A or less when connected to 1 head
1.9 A or less when connected to 2 heads

Environmental resistance

Ambient temperature

0 to +50 °C

Relative humidity

85% RH or less (no condensation)

Weight

Approx. 1,500 g