Main Unit, Positive-pressure Type, 1 Mpa, NPN AP-C33W

Model

AP-C33W

Type

Positive pressure

Rated pressure

0 to +1.000 MPa

Fluid type

Air or non-corrosive gases

Type of pressure

Gauge pressure

Display

3 1/2-digit, 2-color, 7-segment LED (Character height: 11 mm), Display cycle: 10 times/s

Operation indicator

Red LED x 2 (corresponding to control output 1 and 2)

Display resolution

Normal mode: 0.001 MPa, Focus mode: 0.1 kPa

Power consumption

Normal

12 V: 720 mW (60 mA) or less, 24 V: 960 mW (40 mA) or less^*1

Display temperature characteristic

±1 % of F.S. max.

Hysteresis

Variable (Standard: 0.5 % of F.S.)^*2

Response time (Chattering prevention function)

2.5, 5, 100, or 500 ms (selectable)

I/O

Analogue output

1 to 5 V with load impedance of 1 kΩ max. (or zero-shift input selectable)

Zero-shift input

Input time: 2 ms or more. (or analog output selectable)

Control output

NPN open collector 100 mA max. (at 40 V or below) with max. residual voltage of 1 V, 2 outputs (NO or NC selectable)

Pressure port

Rc (PT) 1/8 180 ° rotation

Rating

Power voltage

12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less

Power consumption

Eco mode

12 V: 480 mW (40 mA) or less, 24 V: 720 mW (30 mA) or less^*1

Environmental resistance

Pressure resistance

1.5 MPa

Ambient temperature

0 to +50 °C (No freezing)

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

Material

Front housing: Polysulfone, Rear housing: PBT, Front seat: Polycarbonate, Pressure port: Zinc die-casting

Accessories

Power supply cord (2-m with connector), Unit seal

Weight

Approx. 30 g (without cable) /Approx. 85 g (with 2-m cable)