Manual-Calibration Fibreoptic Sensor

FS-V/T/M series

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Recommended Replaceable Products: Digital Fibre Optic Sensor - FS-N40 series

Fibre Amplifier, Cable Type, Zero-line Expansion Unit FS-M0

FS-M0 - Fibre Amplifier, Cable Type, Zero-line Expansion Unit

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Data Sheet (PDF)

Data Sheet (PDF)

Manuals

CAD Data

Specifications

Model		FS-M0
Type		0-line expansion unit
Output		-
Light source		Red LED
Sensitivity adjustment/Mode selection		8-turn trimmer (with indicator), FINE/TURBO (switch-selectable)
Response time		410 µs to 1.2 ms^*1
Operation mode		LIGHT-ON/DARK-ON (switch-selectable)
Indicator lamp		Output: Red LED Stable operation: Green LED
Timer function		ON-delay: 40 ms/OFF-delay: 40 ms/Timer OFF (switch-selectable)
Input		―
Control output
Stability output
Protection circuit		Reversed polarity protection, Overcurrent protection, Surge absorber
Unit expansion		Up to 16 expansion units can be connected (a total of 17 units)^*2
Mutual interference suppression		FINE : 4, TURBO/SUPER: 8
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less^*3
	Current consumption	35 mA or less
Environmental resistance	Ambient light	Incandescent lamp: 10,000 lux max., Sunlight: 20,000 lux max.
	Ambient temperature	-10 to +55 °C (No freezing)^*4
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
	Shock resistance	500 m/s², 3 times in each of the X, Y, and Z directions
Case material		Polycarbonate
Weight		Approx. 20 g
^1 The response speed varies depending on the number of expansion units connected. ^2 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less. 3 to 10 Units: -10 to +50°C (14 to 122°F), 11 to 16 Units: -10 to +45°C (14 to 113°F) ^3 Power to the FS-T2/T0/M2/M0 is supplied through the FS-T1/M1/V1/V11/R0, PS-T1, LV-21A/11A or CZ-V1. ^4 When extended, the ambient usage temperature varies according to the following conditions. Be sure to mount units on a DIN rail (attached to a metal plate) and ensure that the output current is 20 mA or less. When extended

Data Sheet (PDF) Other Models