Fibre Photoelectric Sensors

FS series

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Fibre Amplifier, Cable Type, PNP FS2-62P

FS2-62P - Fibre Amplifier, Cable Type, PNP

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		FS2-62P
Type		Trimmer：Ultra-long detecting distance
Light source		Red LED
Sensitivity adjustment		8-turn trimmer
Response time		500 µs
Operation mode		LIGHT-ON/DARK-ON (switch-selectable)
Indicator lamp		Output: Red LED Stable operation: Green LED
Timer function		ON-delay: 40 ms/OFF-delay: 40 ms/Timer OFF (switch-selectable)
External calibration input signal		―
Buzzer mode		Buzzer ON when control output turns ON/Buzzer ON when alarm output turns ON/Buzzer OFF (switch-selectable)
Output		PNP output
Control output		PNP open-collector 100 mA max. (30 V max.), Residual voltage 1 V max.
Stability output		PNP open-collector 50 mA max. (30 V max.), Residual voltage 1 V max.
Protection circuit		Reversed polarity protection, Overcurrent protection, Surge absorber
Rating	Power voltage	12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
	Current consumption	35 mA or less
Environmental resistance	Ambient light	Incandescent lamp: 10,000 lux max., Sunlight: 20,000 lux max.
	Ambient temperature	-10 to +55 °C (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
	Shock resistance	500 m/s², 3 times in each of the X, Y, and Z directions
Material		Polycarbonate
Weight		Approx. 61 g