Amplifier Unit, Main Unit, PNP PS-T1P

Model

PS-T1P

Type

Main unit

Output

PNP

Response time

500 µs

Operation mode

LIGHT-ON/DARK-ON (switch-selectable)

Indicator lamp

Output indicator: Red LED, Stable operation indicator: Green LED, Calibration indicator: Yellow LED

Timer function

ON-delay: 40 ms, OFF-delay: 40 ms, Timer OFF (switch-selectable)

External calibration input signal

Non-voltage input (contact, solid state)

Control output

PNP:100 mA max. (30 V max.) Residual voltage: 1 V max.

Stability output

PNP:50 mA max. (30 V max.) Residual voltage: 1 V max. ^*1

Protection circuit

Reverse polarity protection, Over-current protection, Surge absorber

Multiple connections to Expansion units

Up to 16 expansion units can be connected (a total of 17 units)

Rating

Power voltage

12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less

Current consumption

35 mA or less

Environmental resistance

Ambient temperature

-10 to +55 °C (No freezing)^*2

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

Shock resistance

500 m/s², 3 times in each of the X, Y, and Z directions

Case material

Body/Cover: Polycarbonate

Weight

Approx. 75 g (including 2 m cable)