Stylus type General-purpose Sensor head (Low measuring force type) GT2-P12L

GT2-P12L - Stylus type General-purpose Sensor head (Low measuring force type)

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		GT2-P12L^*1
Detection system		Scale Shot System II, absolute (no tracking errors) type
Measuring range		12 mm
Resolution		0.5 μm
Indicated accuracy		2 µm (p-p)^*2
Measuring force	Downward mounting	0.2 N^*3
	Side mounting	0.15 N^*3
	Upward mounting	0.1 N^*3
Sampling cycle		4 ms
Mechanical response		4 Hz^*2
Operation indicator light		2-colour LED (red, green)
Environmental resistance	Enclosure rating	-
	Ambient temperature	-10 to +55 °C (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
	Shock resistance	1,000 m/s² (IEC60068-2-27)
Materials	Main body	Main body case: SUS 303, Status indicator: PET, Sensor head-relay connector cable: PUR, Relay connector: PBT, Spindle of GT2-PA12K/PA12: SUS430 (Fluorine coating)
	Dust boot	-
	Contact	SUS304, SUS440C^*4
Sensor head cable		Optional (connect to relay connector)
Weight		Approx. 35 g (not including cable)^*5
^1 Note: You may not be able to connect the sensor head to the amplifier unit depending on when the amplifier unit was purchased.For details, contact your local sales office. ^2 Value when the ambient temperature is 20 °C. ^3 Representative value at the centre of the measuring range. Please note that the measuring force varies by the installation state of the dust boot. This is a representative value when using the GT2-PA12K/PA12 with a pressure of 0.25 MPa. The measuring force varies depending on the air pressure used. For details, see table 1. No dust boots are used with the GT2-PA12K/PA12. ^4 Contacts are available as options sold separately. ^*5 Including the relay connector.

Data Sheet (PDF) Other Models